S100 Computers

Home S-100 Boards History New Boards Software Boards For Sale
Forum Other Web Sites News Index    
 
Industrial Micro Systems - 16K Static RAM
This is a relatively straightforward  and simple 16K RAM card but it had some nice options.

IMS 16K RAM

The board could be addressed to any 16K hex boundary. The MWRT signal could be generated on the board for systems that did not have a front panel (like the IMS systems).  The phantom line was recognized. The board had a simple "memory management" circuit that allowed multiple 16K boards to reside at the same address and be switched in or out. The default port to do this was 7FH but the port can be selected with jumpers. The POC option (S-100 pin 99) was implemented with jumper J3.  The board utilized 2114 RAM chips
 
The manual for this board can be obtained here
.

 

Other IMS S-100 Boards
16K RAM   32K RAM    64K DRAM    80186 CPU    FDC 400    FDC 930    HDC    IO Board    Z80 CPU  
8K RAM   4 Line Serial     CPZ 4800   LANS100    CPS-Q6A   CPS-MX   CPX-BMX   QIC Tape Controller  Other Boards

 

This page was last modified on 12/08/2013