Alpha Micro - AM-600T Tape Drive Controller Board
This board came out in 1984. It is a board to read/write to
standard industrial 1/2" seven and nine track drives.
The board was fully compatible with all Alpha Micro CPU cards (except the
AM-1000). It had full S-100 bus DMA and interrupt capability. It could
be configured for controllers for both 7 and 9 track tape transports with
densities up to 3200 bytes/inch and tape velocities up to 37.5 ips.
Software was provided to format tapes in most common tape formats.
A detailed manual can be obtained
This page was last modified