I'm still going back and forth with Phoenix - they have a Sullins part that might work but only 45 pieces. In the process, I pulled the EDAC data sheet, so here it is for future reference. Note that the 5xx section of the P/N is the tail designator; I think Todd is reading it correctly as .175". You can go on their website to see other options. Unfortunately the guides I purchased (and installed in the original thick N8VEM backplane) have no part or manufacturer information printed on them so I have no idea of source. Jack > -----Original Message----- > From: n8vem...@googlegroups.com [mailto:n8vem- > s1...@googlegroups.com] On Behalf Of Todd Goodman > Sent: Monday, January 06, 2014 2:09 PM > To: n8vem...@googlegroups.com > Subject: Re: [N8VEM-S100:2206] Re: Interest, Discussion and R&D on a 18 Slot > S100 Backplane & ATX PSU board. > > Hi Matt, > > I haven't used them before and was going based on part numbers others have > posted. > > I think when they say board thickness they are talking about the thickness of > the card edge connector that can be inserted into the connector. Looking at > the data sheet these should accept board thicknesses from .054 (1.37mm) to > .070 (1.78mm.) > > Looking in the datasheet, the solder tail is .175 (4.45mm) so should be fine > with the two backplane boards (it seems to me, but anyone please speak up.) > > Regards, > > Todd > > * Matthew Turner <turner...@hotmail.com> [140106 14:46]: > > Hey Todd! > > > > > > > > Has anyone used these on the 8-slot backplanes? I notice they say board > thickness of 1.57mm, and these are a full .125" or about 3mm. Even the 18 > slot board may be too thick if it's going to be about 2mm. 1.57mm seems to be > close to 1/16", which is fairly thin. Or am I missing something? > > > > > > > > Regards, > > > > > > > > Matt Turner > > > > > > > > > > > > > > > Date: Mon, 6 Jan 2014 14:19:37 -0500 > > > From: t...@bonedaddy.net > > > To: n8vem...@googlegroups.com > > > Subject: Re: [N8VEM-S100:2203] Re: Interest, Discussion and R&D on a 18 > Slot S100 Backplane & ATX PSU board. > > > > > > Hi Matt, > > > > > > Yes, I'd plan to do everything via PayPal. > > > > > > Going by Vince's past post regarding volume discounts for the > > > connectors I was going to go with Mouser, manufacturer part #346-100- > 520-202. > > > > > > Exact price will depend upon how many people want them, but I > > > anticipate to purchase at least 250 for a per unit price of $10.68 > > > (noninclusive of shipping to me from Mouser or from me to a > > > purchaser.) > > > > > > This will include a backorder so not all will arrive at the same time. > > > > > > If anyone else is interested, please let me know via private email > > > or here with rough numbers you might be interested in. > > > > > > Regards, > > > > > > Todd > > > > > > * Matthew Turner <turner...@hotmail.com> [140106 11:27]: > > > > Hey Todd! > > > > > > > > > > > > > > > > Do everything via Paypal? I'm already down for two of these boards, plus > I need the connectors for these and about 21 more for my existing backplanes. > What sort of pricing do you think is possible for a large order? > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > > > Matt Turner > > > > > > > > > > > > > > > > > > > > > > > > > Date: Mon, 6 Jan 2014 11:16:57 -0500 > > > > > From: t...@bonedaddy.net > > > > > To: n8vem...@googlegroups.com > > > > > Subject: Re: [N8VEM-S100:2188] Re: Interest, Discussion and R&D on a > 18 Slot S100 Backplane & ATX PSU board. > > > > > > > > > > * Ants Pants <rota...@gmail.com> [140106 09:29]: > > > > > > Hi Vince, > > > > > > > > > > > > The price for the board is in USD (as this is what is accepted > > > > > > by the PCB house also) im prity sure Paypal will sort the > > > > > > conversion but i usually just leave any funds with paypal in > > > > > > USD anyways, so there shouldnt be any conversion at the end of > > > > > > the day for the purchaser. You are quite correct in saying > > > > > > that shipping could end up being expensive. if there are a few > > > > > > guys who would like them in the US/Canada it may be cheaper to > > > > > > ship a few boards to one of you and then one can distribute > > > > > > from there at a cheaper price (i love the US postal system.. > > > > > > quick and cheap compared to NZ). most likely ill have to DHL > > > > > > or Fedex it. NZ Post website is a bit of a PITA to be honest and not > always accurate. thats why ill go take the package and get the actual cost > from the office itself closer to shipment date. > > > > > > > > > > > > > > > Hi Ant (and all,) > > > > > > > > > > I'm interested in three of these boards and am in the US > > > > > (03034.) > > > > > > > > > > I'd be willing to accept all US/Canadian boards and then reship > > > > > via USPS if that makes sense to people. > > > > > > > > > > I also think I can make a bulk purchase of connectors so > > > > > everyone (incuding myself) can get a better price. > > > > > > > > > > Regards, > > > > > > > > > > Todd > > > > > > > > > > -- > > > > > You received this message because you are subscribed to the Google > Groups "N8VEM-S100" group. > > > > > To unsubscribe from this group and stop receiving emails from it, send > an email to n8vem-s100+...@googlegroups.com. > > > > > For more options, visit https://groups.google.com/groups/opt_out. > > > > > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > Groups "N8VEM-S100" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > an email to n8vem-s100+...@googlegroups.com. > > > > For more options, visit https://groups.google.com/groups/opt_out. > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups "N8VEM-S100" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > email to n8vem-s100+...@googlegroups.com. > > > For more options, visit https://groups.google.com/groups/opt_out. > > > > > > -- > > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to n8vem-s100+...@googlegroups.com. > > For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to n8vem-s100+...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4259 / Virus Database: 3658/6979 - Release Date: 01/06/14
Attachment:
EDAC-346-100-520-202.pdf
Description: EDAC-346-100-520-202.pdf