|
Hey Todd!
Has anyone used these on the 8-slot backplanes? I notice they say board thickness of 1.57mm, and these are a full .125" or about 3mm. Even the 18 slot board may be too thick if it's going to be about 2mm. 1.57mm seems to be close to 1/16", which is fairly thin. Or am I missing something? Regards, Matt Turner > Date: Mon, 6 Jan 2014 14:19:37 -0500 > From: t...@bonedaddy.net > To: n8vem...@googlegroups.com > Subject: Re: [N8VEM-S100:2203] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board. > > Hi Matt, > > Yes, I'd plan to do everything via PayPal. > > Going by Vince's past post regarding volume discounts for the connectors > I was going to go with Mouser, manufacturer part #346-100-520-202. > > Exact price will depend upon how many people want them, but I anticipate > to purchase at least 250 for a per unit price of $10.68 (noninclusive of > shipping to me from Mouser or from me to a purchaser.) > > This will include a backorder so not all will arrive at the same time. > > If anyone else is interested, please let me know via private email or > here with rough numbers you might be interested in. > > Regards, > > Todd > > * Matthew Turner <turn...@hotmail.com> [140106 11:27]: > > Hey Todd! > > > > > > > > Do everything via Paypal? I'm already down for two of these boards, plus I need the connectors for these and about 21 more for my existing backplanes. What sort of pricing do you think is possible for a large order? > > > > > > > > Regards, > > > > > > > > Matt Turner > > > > > > > > > > > > > Date: Mon, 6 Jan 2014 11:16:57 -0500 > > > From: t...@bonedaddy.net > > > To: n8vem...@googlegroups.com > > > Subject: Re: [N8VEM-S100:2188] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board. > > > > > > * Ants Pants <rot...@gmail.com> [140106 09:29]: > > > > Hi Vince, > > > > > > > > The price for the board is in USD (as this is what is accepted by the PCB > > > > house also) im prity sure Paypal will sort the conversion but i usually > > > > just leave any funds with paypal in USD anyways, so there shouldnt be any > > > > conversion at the end of the day for the purchaser. You are quite correct > > > > in saying that shipping could end up being expensive. if there are a few > > > > guys who would like them in the US/Canada it may be cheaper to ship a few > > > > boards to one of you and then one can distribute from there at a cheaper > > > > price (i love the US postal system.. quick and cheap compared to NZ). most > > > > likely ill have to DHL or Fedex it. NZ Post website is a bit of a PITA to > > > > be honest and not always accurate. thats why ill go take the package and > > > > get the actual cost from the office itself closer to shipment date. > > > > > > > > > Hi Ant (and all,) > > > > > > I'm interested in three of these boards and am in the US (03034.) > > > > > > I'd be willing to accept all US/Canadian boards and then reship via USPS > > > if that makes sense to people. > > > > > > I also think I can make a bulk purchase of connectors so everyone > > > (incuding myself) can get a better price. > > > > > > Regards, > > > > > > Todd > > > > > > -- > > > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > > > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > > > For more options, visit https://groups.google.com/groups/opt_out. > > > > > > -- > > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > > For more options, visit https://groups.google.com/groups/opt_out. > > -- > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. |