[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [N8VEM-S100:2205] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
Hi Matt,
I haven't used them before and was going based on part numbers others
have posted.
I think when they say board thickness they are talking about the
thickness of the card edge connector that can be inserted into the
connector. Looking at the data sheet these should accept board
thicknesses from .054 (1.37mm) to .070 (1.78mm.)
Looking in the datasheet, the solder tail is .175 (4.45mm) so should be
fine with the two backplane boards (it seems to me, but anyone please
speak up.)
Regards,
Todd
* Matthew Turner <turner...@hotmail.com> [140106 14:46]:
> Hey Todd!
>
>
>
> Has anyone used these on the 8-slot backplanes? I notice they say board thickness of 1.57mm, and these are a full .125" or about 3mm. Even the 18 slot board may be too thick if it's going to be about 2mm. 1.57mm seems to be close to 1/16", which is fairly thin. Or am I missing something?
>
>
>
> Regards,
>
>
>
> Matt Turner
>
>
>
>
>
>
> > Date: Mon, 6 Jan 2014 14:19:37 -0500
> > From: t...@bonedaddy.net
> > To: n8vem...@googlegroups.com
> > Subject: Re: [N8VEM-S100:2203] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
> >
> > Hi Matt,
> >
> > Yes, I'd plan to do everything via PayPal.
> >
> > Going by Vince's past post regarding volume discounts for the connectors
> > I was going to go with Mouser, manufacturer part #346-100-520-202.
> >
> > Exact price will depend upon how many people want them, but I anticipate
> > to purchase at least 250 for a per unit price of $10.68 (noninclusive of
> > shipping to me from Mouser or from me to a purchaser.)
> >
> > This will include a backorder so not all will arrive at the same time.
> >
> > If anyone else is interested, please let me know via private email or
> > here with rough numbers you might be interested in.
> >
> > Regards,
> >
> > Todd
> >
> > * Matthew Turner <turner...@hotmail.com> [140106 11:27]:
> > > Hey Todd!
> > >
> > >
> > >
> > > Do everything via Paypal? I'm already down for two of these boards, plus I need the connectors for these and about 21 more for my existing backplanes. What sort of pricing do you think is possible for a large order?
> > >
> > >
> > >
> > > Regards,
> > >
> > >
> > >
> > > Matt Turner
> > >
> > >
> > >
> > >
> > >
> > > > Date: Mon, 6 Jan 2014 11:16:57 -0500
> > > > From: t...@bonedaddy.net
> > > > To: n8vem...@googlegroups.com
> > > > Subject: Re: [N8VEM-S100:2188] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
> > > >
> > > > * Ants Pants <rota...@gmail.com> [140106 09:29]:
> > > > > Hi Vince,
> > > > >
> > > > > The price for the board is in USD (as this is what is accepted by the PCB
> > > > > house also) im prity sure Paypal will sort the conversion but i usually
> > > > > just leave any funds with paypal in USD anyways, so there shouldnt be any
> > > > > conversion at the end of the day for the purchaser. You are quite correct
> > > > > in saying that shipping could end up being expensive. if there are a few
> > > > > guys who would like them in the US/Canada it may be cheaper to ship a few
> > > > > boards to one of you and then one can distribute from there at a cheaper
> > > > > price (i love the US postal system.. quick and cheap compared to NZ). most
> > > > > likely ill have to DHL or Fedex it. NZ Post website is a bit of a PITA to
> > > > > be honest and not always accurate. thats why ill go take the package and
> > > > > get the actual cost from the office itself closer to shipment date.
> > > >
> > > >
> > > > Hi Ant (and all,)
> > > >
> > > > I'm interested in three of these boards and am in the US (03034.)
> > > >
> > > > I'd be willing to accept all US/Canadian boards and then reship via USPS
> > > > if that makes sense to people.
> > > >
> > > > I also think I can make a bulk purchase of connectors so everyone
> > > > (incuding myself) can get a better price.
> > > >
> > > > Regards,
> > > >
> > > > Todd
> > > >
> > > > --
> > > > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> > > > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> > > > For more options, visit https://groups.google.com/groups/opt_out.
> > >
> > >
> > > --
> > > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> > > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> > > For more options, visit https://groups.google.com/groups/opt_out.
> >
> > --
> > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> > For more options, visit https://groups.google.com/groups/opt_out.
>
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.