[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CPM3 Disk Image - quick start and Images posted



I have now uploaded my updated documentation aimed at new S100 users discussing 'Disk Layout Considerations for CP/M 3.0 System Build'  for the s100computers.com IDE interface board (better late than never :-) )
If there are any errors or omissions in the document please let me know and I will endeavour to make corrections.
The document is called Z80 CP_M 3.0 build_Rev01.doc and can be found in my wiki folder linked below
 
http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=David%20Fry
 
I have also updated the document Z80_LBA_Addressing_Rev01.doc which lists the code changes by source file, and I have also cleaned up the ZIP archive CPM3_LBA.zip removing all old boot disk images in order to direct the source of disk images to one location.
 
For all CP/M disk images please now refer to the recent work done by Dave (yoda) at the following link
 
http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=CPM3-Disk-Images
 
regards
 
David Fry
 

On Sunday, June 22, 2014 8:42:01 PM UTC+1, yoda wrote:
I have uploaded the basic images and a short document on how to put these on a CF card with all the necessary tools included.  The link is http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=CPM3-Disk-Images

I have also included modified cpmtools that understand the disk format so you can manipulate the images before writing them to a CF card.   I would like to use this thread for questions and suggestions for the documentation.  I have not verified the prop images as I did not have any 74LS374's on hand so I could not finish bringing up my prop console board - should be able to do that by the coming weekend.  I assume a lot of you can verify whether they work or not.  I believe they should.  I have verified the serial ones do work.

I am opening another thread for suggestions for going forward.  I want to cover how to build and customize the actual cpmldr and cpm3.sys files.  I will leverage a lot of what John has done and David Fry will contribute his work on the LBA addressing changes that made this all work.

Let me know how it goes.

Dave