[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:5582] SCC and Z80/8086 monitor



I guess this explains why my setup didn't work the first time I tried it with the ribbon cable - the ground pin not connected properly. 

That solves the cabling -- now I need to tackle why the monitor is not seeing serial input from the SCC. 

Sent from my iPhone

On Nov 14, 2014, at 1:15 AM, norwestrzh via N8VEM-S100 <n8vem...@googlegroups.com> wrote:

Problem solved!

The source of the confusion is that the serial connector pins (P57 and P58) are numbered not as a header, as one might expect, but sort of like an IC (with top row backwards).  I.E. instead of:

2 4 6 8 10
1 3 5 7 9

they are:

6 7 8 9 G
1 2 3 4 nc

(this is when you use a ribbon cable header -- a "DE-9" connector)

So now I understand Rich Leary's suggestions a little better, and I can see that (as he suggested) tha the best way to get ground to pin 5 of the serial cable is with a little jumper across the 2 far right pins.

Roger

--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.