[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:5624] Status of new S100 Boards.

Hi John!

For these and other boards, please update the EDA file sets on the wiki with the current designs so that other builders can use them.


Andrew Lynch

From: monahanz <mo...@vitasoft.org>
To: n8vem...@googlegroups.com
Sent: Tuesday, November 18, 2014 12:56 PM
Subject: [N8VEM-S100:5624] Status of new S100 Boards.

Just a status update on the new VDP Video Board, ISA to S100 Bus converter board and 16MB S100 static RAM board...

checks out fine. I'm still trying to locate suitable small speakers for the board.

Unfortunately I have run into problems with the ISA to S100 bus converter board
It works fine with our 8088 board but not so for 16 bit writes (8086 board).  I'm a bit baffled since the prototype worked fine. I did a few small changes, clearly one not so small!
May have to do it again!

The 16 MB Static RAM board boards
just came in from China (PCBcart).  I have not checked them out yet, but look nice.

That's the good news, the bad news is I am going on vacation and will not be able to do any more work until the beginning of next month. 
Since many/most have ordered multiple boards I will hold everything until all 3 are ready unless somebody wants one immediately.


You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.