[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder

To: n8vem-s100@googlegroups.com
Subject: RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
From: "G. Beat" <gregor...@gmail.com>
Date: Sun, 26 Oct 2014 09:26:16 -0700 (PDT)
In-reply-to: <ae55e7e2-73ae-47c4-9e0e-fc7d1bf3b301@googlegroups.com>
References: <D072616B.C26D%rich.cini@verizon.net> <51c25f57-cb9b-4eec-9ff4-0b91d0e80e1d@googlegroups.com> <002b01cff133$e68d4dc0$b3a7e940$@vitasoft.org> <1172ea9d-c5ee-482b-a3c1-1db2e5f14bd6@googlegroups.com> <ae55e7e2-73ae-47c4-9e0e-fc7d1bf3b301@googlegroups.com>

I did a quick review of standard pin spacing (Thru-Hole) for battery holders AND solder tab coin cells.
20.5 mm shoukd be used for 20 and 23.5 mm lithium coin cells.

The wider spacing, noted for this MSDOS board,
can be found with some Surface Mount (SMT) battery holders.

gb

References:
- MSDOS Support Board V2 battery holder
  - From: Richard Cini <rich...@verizon.net>
- Re: MSDOS Support Board V2 battery holder
  - From: Frank Schieschke <f.schi...@googlemail.com>
- RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: "John Monahan" <mon...@vitasoft.org>
- RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: "G. Beat" <gregor...@gmail.com>
- RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: "G. Beat" <gregor...@gmail.com>

Prev by Date: RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
Next by Date: Wameco CRT-1 manual
Previous by thread: RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
Next by thread: Wameco CRT-1 manual
Index(es):
- Date
- Thread