[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder

To: n8vem-s100@googlegroups.com
Subject: RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
From: "G. Beat" <gregor...@gmail.com>
Date: Sun, 26 Oct 2014 09:00:59 -0700 (PDT)
In-reply-to: <002b01cff133$e68d4dc0$b3a7e940$@vitasoft.org>
References: <D072616B.C26D%rich.cini@verizon.net> <51c25f57-cb9b-4eec-9ff4-0b91d0e80e1d@googlegroups.com> <002b01cff133$e68d4dc0$b3a7e940$@vitasoft.org>

Lithium Coin Cells are categorized by the DIAMETER of the battery cells (in mm): 16, 20, 23.5
The solder pin spacing of the coin cell holder reflects this.

Keystone Ekectronics (Astoria, NY) is your best source, been mfg. battery contacts & holders, since 1946.
http://www.digikey.com/product-highlights/us/en/keystone-electronics-battery-contacts/1206

Digi-Key and Mouser are distributors.
http://www.digikey.com/product-highlights/us/en/keystone-lithium-coin-cell-battery/3888

Follow-Ups:
- Re: [N8VEM-S100:5455] Re: MSDOS Support Board V2 battery holder
  - From: Rich Cini <rich...@verizon.net>
- RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: "G. Beat" <gregor...@gmail.com>

References:
- MSDOS Support Board V2 battery holder
  - From: Richard Cini <rich...@verizon.net>
- Re: MSDOS Support Board V2 battery holder
  - From: Frank Schieschke <f.schi...@googlemail.com>
- RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: "John Monahan" <mon...@vitasoft.org>

Prev by Date: RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
Next by Date: Re: [N8VEM-S100:5455] Re: MSDOS Support Board V2 battery holder
Previous by thread: RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
Next by thread: Re: [N8VEM-S100:5455] Re: MSDOS Support Board V2 battery holder
Index(es):
- Date
- Thread