[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MSDOS Support Board V2 battery holder

To: n8vem-s100@googlegroups.com
Subject: Re: MSDOS Support Board V2 battery holder
From: Frank Schieschke <f.schi...@googlemail.com>
Date: Sun, 26 Oct 2014 05:44:09 -0700 (PDT)
In-reply-to: <D072616B.C26D%rich.cini@verizon.net>
References: <D072616B.C26D%rich.cini@verizon.net>

I have had the same problem.
I drilled a additional hole and the 20.5mm holder sits in very well.
Then removing some of the solder mask around the additional hole and solder it in.
Frank

Attachment: MVC-002F.JPG
Description: JPEG image

Follow-Ups:
- Re: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: Richard Cini <rich...@verizon.net>
- RE: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
  - From: "John Monahan" <mon...@vitasoft.org>

References:
- MSDOS Support Board V2 battery holder
  - From: Richard Cini <rich...@verizon.net>

Prev by Date: MSDOS Support Board V2 battery holder
Next by Date: Re: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
Previous by thread: MSDOS Support Board V2 battery holder
Next by thread: Re: [N8VEM-S100:5450] Re: MSDOS Support Board V2 battery holder
Index(es):
- Date
- Thread