Josh,
I don't have the SD card installed. I was thinking it would jump to
the onboard ROM.
Thats not the case?
On 11/10/14 04:25 PM, Crusty OMO wrote:
Hi Don,
Well, the LED's on top should help. Upon Reset, the BOOT ROM
led should be on.
When you click run, that LED will turn off and the SD Card LED
should flash like it's being accessed.
I drew up a diagram for serial cable connection... I'll check if
it's on the wiki, but for now, please find attached.
Regards,
Josh
Date: Mon, 10 Nov 2014 16:09:23 -0800
From: ilv...@gmail.com
To: n8vem...@googlegroups.com
Subject: Re: [N8VEM-S100:5553] ALTAIR-IMSAI 8080 CPU Board on
Ebay
Thanks Josh,
That could be useful.
My board is not working. Thinking it might be a simple serial
cable
problem.
On 11/10/14 04:01 PM, Crusty
OMO wrote:
Hi Don,
No, it needs the front panel for:
-MWrite generation
-Reset
-Run
I am thinking of adding those functions on a jumper
selection for version 2, thus making a self contained CP/M
board.
Cheers,
Josh
Date: Mon, 10 Nov 2014 15:40:12
-0800
From: ilv...@gmail.com
To: n8vem...@googlegroups.com
Subject: Re: [N8VEM-S100:5550] ALTAIR-IMSAI 8080 CPU
Board on Ebay
Josh,
Will you 8080 board work without a front panel
installed?
On 11/ 9/14 09:17 PM,
Crusty OMO wrote:
Hi Group,
Well, I put up one of these boards fully built and
tested on ebay. I hope to reach some ALTAIR / IMSAI
owners that may want to bring their system out of
the closet. If anyone is interested in following
the auction, it's ebay item # 251712707885
I hope it will come up on searches... I couldn't
figure out how to make it "International shipping".
Hopefully, it will drum up some interest in N8VEM
too.
Cheers,
Josh
PS. Tom,
I do not have John's Propeller Board. Perhaps John
has a blank sitting on the shelf with my name on it?
I could probably write support for the board, but,
it would be difficult for me to debug without a
board to test with.
Cheers,
Josh
Date: Sun, 9 Nov 2014
18:52:22 -0800
Subject: Re: [N8VEM-S100:5544] ALTAIR-IMSAI 8080
CPU Board, BOM errors
From: laf...@lafleur.us
To: n8vem...@googlegroups.com;
crus...@hotmail.com
Josh...
Do you supports John's Propeller Driven
Console-IO Board
on the 8080 board CP/M image?? if no, is this
something your planing on adding??
ADDING THIS WOULD MAKE A GREAT TWO BOARD
SYSTEM...
Thanks
--
You received this message because you are
subscribed to the Google Groups "N8VEM-S100"
group.
To unsubscribe from this group and stop receiving
emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed
to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Don Caprio
ilv...@gmail.com
--
You received this message because you are subscribed to
the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the
Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Don Caprio
ilv...@gmail.com
--
You received this message because you are subscribed to the
Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Don Caprio
ilv...@gmail.com
|