[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MSDOS Support V2 PCB RTC problem.

My configuration at the moment:
Z80 CPU V2 with V5.02 monitor. 6MHz
80286 Master Slave CPU card.  6mhz V10.3 monitor
4mb SRAM, 1MB populated
System Monitor Board V2
ZFDC Floppy controller
CompuPro Interfacer1 I/O board wired as an Prop I/O board.
Dual IDE Board with CP/M 3.0 - "Yoda" CPM 3 image incl. Z-rtc.com