[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: finished case with SMB installed

To: n8vem-s100@googlegroups.com
Subject: Re: finished case with SMB installed
From: Philippe Elie <philip...@gmail.com>
Date: Sun, 21 Sep 2014 07:56:23 -0700 (PDT)
In-reply-to: <c49e7e1f-94aa-40ac-8a6f-2d3edf356aaf@googlegroups.com>
References: <996c2ef6-c4e8-4c87-9fa5-8919cab42736@googlegroups.com> <c49e7e1f-94aa-40ac-8a6f-2d3edf356aaf@googlegroups.com>

Hi folks,

I just finished the dual IDE board and installed CPM3 thanks to the wonderful guide provided by Yoda and David Fry, I did not encounter a single problem !

below a picture of the system running CPM3 (non banked as I still have an old Z80 board). I applied decals on the front and back panel to get good looking legends. I realize the available memory is quite limited (I think TPA is around 30-40K) so that limits quite a bit. Next step : get the real thing and build a NV8EM Z80 board !

cheers

Philippe

Follow-Ups:
- RE: [N8VEM-S100:5245] Re: finished case with SMB installed
  - From: "John Monahan" <mon...@vitasoft.org>
- Re: [N8VEM-S100:5245] Re: finished case with SMB installed
  - From: Mark G Thomas <Ma...@Misty.com>

References:
- finished case with SMB installed
  - From: Philippe Elie <philip...@gmail.com>
- Re: finished case with SMB installed
  - From: Edward Snider <zipps...@gmail.com>

Prev by Date: Z80/8080 emulator and lots of CP/M resources
Next by Date: RE: [N8VEM-S100:5243] Z80/8080 emulator and lots of CP/M resources
Previous by thread: Re: finished case with SMB installed
Next by thread: RE: [N8VEM-S100:5245] Re: finished case with SMB installed
Index(es):
- Date
- Thread