|
Hi Todd,
Sorry it's not working 100%... I would really like to know what's going wrong with it! Too bad you don't live next door... Regards, Josh > Date: Fri, 27 Feb 2015 18:23:04 -0600 > From: litte...@mchsi.com > To: n8vem...@googlegroups.com > Subject: Re: Zork load under v2.3 was - Re: [N8VEM-S100:6469] Re: CP/M running, But now what ? > > I just tried, using v1.2 > > I can run Zork 1-3 on com port, no prop I/O, it's not > supported. Remember: on my system when using the com port, > I can only see the first file when I do a 'dir'. I know > the files are there because I can see them using v2.3 & > the prop I/O. > > > > > ----- Original Message ----- > From: "Jeff Albrecht" <jeffrey...@gmail.com> > To: n8vem...@googlegroups.com > Sent: Friday, February 27, 2015 4:09:40 PM GMT -06:00 US/Canada Central > Subject: Zork load under v2.3 was - Re: [N8VEM-S100:6467] Re: CP/M running, But now what ? > > > I happened to be experimenting with a disk image made from the v1.2 ROM/Bios today on my system running a v2.3 ROM/Bios. It was behaving oddly. I remember reading about Zork loading oddly in a thread so I tried Zork and it behaved as described above. Powered down changed jumpers, put the original v1.2 ROM in the board with the SD card as delivered. I ran zork in this configuration fine. Then I re-installed the v2.3 ROM and carefully made a new boot disk from the "FIRMWARE and CPM V-Disk Images AIR-V23.zip" file. Zork did not run. Also LS hung the system consistently as did some other files on A:. Stat ran fine consistently. > > > Are other folks running v2.3 ROM and bios ok? Perhaps check their A:LS and c:zork3 > > > - jeffa > > > -- > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com . > For more options, visit https://groups.google.com/d/optout . > > -- > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. |