Re: CF Images for the Dual IDE/CF

Hi Gary,

I downloaded the zip file and extracted cpmtools and Win32diskImage programs with no issues. I am following the document "making CP/M3 CF disks for S100 IDE Board" by Yoda. When I went to the Images folder and tried to extract the CF image file I got an error from WinZip saying the file was not a valid archive file. I also downloaded the original zip file from the s100computers site and got the same result. So far I haven't been able to extract a valid .img file!

Any Ideas?

Thanks,

Harold

On Tuesday, June 30, 2015 at 9:35:25 AM UTC-4, hlr...@gmail.com wrote:

Hi Everyone.

I have been building up a system with the Z80 board, 4MB memory board, Dual IDE/CF, and the prop I/O. I have finished this and am using the V5.02 ROM on the Z80. The system boots up to the menu. However I can't do very much except check memory and display.

Now I want use my V2 Dual IDE/CF to boot up CP/M. Unfortunately the link on s100computers for the jumper and switch setup is not working! I was wondering what people use for settings on SW1, SW2. I think I have jumpers K1 and K5 set okay.

I also found a thread about CF images for the IDE/CF board, but the date was several years ago. Is there a location where I can copy a disk image for CP/M? I have the Kingston 4GB CF.

Any help would be great!

Thanks
Harold