|
Ok, Let us know when you get it running!
> Date: Wed, 28 Jan 2015 13:36:09 -0600 > From: litte...@mchsi.com > To: n8vem...@googlegroups.com > Subject: RE: [N8VEM-S100:6099] Crusty's S100-8080 CPU Card > > Josh, > > I may have not been very clear, I can do OTP's, just have > never done them before. > > I'm used to the old erase and reprogram. > > Todd > > ----- Original Message ----- > From: Crusty OMO <cru...@hotmail.com> > To: n8vem...@googlegroups.com > Sent: Wed, 28 Jan 2015 08:29:25 -0600 (CST) > Subject: RE: [N8VEM-S100:6097] Crusty's S100-8080 CPU Card > > Todd, > > I've used 128M and 1G SD cards with success. I would say they are No-name brands. > > I also have a 4G that doesn't work. Just be sure to format these with FAT-16. From Windows XP, they just call it "FAT". > > As for the eprom, if you don't have what to program it with, I don't see how OTP's are going to be of any help. I would take Gary's offer for a programmed EPROM. I can offer an EPROM too, but shipping from Canada will cost you more. > > Cheers, > Josh > > > Date: Tue, 27 Jan 2015 19:09:45 -0800 > From: litte...@gmail.com > To: n8vem...@googlegroups.com > Subject: [N8VEM-S100:6096] Crusty's S100-8080 CPU Card > > I've been building this board and it's about 90 % populated. > > While I'm waiting for parts, I was wondering about memory. > > 1. For the SD Card, what is recommended size & brand ? > > 2. 27C256 Eprom ? > > My Data I/O took a shit a long time ago and I sold my NeedHams. I do Have a > EasyPro 90B that will do AT27C256 but they are OTP. I'm accustomed to erasing > & reprogramming, but it takes 30 mins to erase under UV light. I have many UV > Eproms, but nothing to program them. They are just too old. > > I see Mouser has; > > http://www.mouser.fr/ProductDetail/Atmel/AT27C256R-70PU/?qs=sGAEpiMZZMutXGli8Ay4kN4PpSZpwfyv80jBz050W6M%3d > > Considering they only cost $1.98 each and are OTP, the "low cost"-vs-"erase time" makes sense. > I have never used OTP, but I could buy a few and write a few and compare. Once I know my > programming hardware works I could go forward.... > > > > > > > > > > > > > > > -- > > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. |