[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:4308] Re: lessons learned building an SMB board set

To: n8vem-s100@googlegroups.com
Subject: Re: [N8VEM-S100:4308] Re: lessons learned building an SMB board set
From: Frank Schieschke <f.schi...@googlemail.com>
Date: Sat, 21 Jun 2014 09:14:12 -0700 (PDT)
Cc: mon...@vitasoft.org
In-reply-to: <001f01cf8ce9$f6a46030$e3ed2090$@vitasoft.org>
References: <62bc621d-a823-4453-9a10-19220538cb0b@googlegroups.com> <af501e9e-e015-49a8-a3ac-53ecb75eb885@googlegroups.com> <001f01cf8ce9$f6a46030$e3ed2090$@vitasoft.org>

Hello John,
thanks for your answer.
Yes, i removed the pSTVAL (pin 13) from the socket and get correct addresses on the TILs.
I am not futher in yet, but i get mainly "FFs" on the data TILs. These "FFs" are not the right data related to the address.

Frank

Follow-Ups:
- Re: [N8VEM-S100:4308] Re: lessons learned building an SMB board set
  - From: Frank Schieschke <f.schi...@googlemail.com>

References:
- lessons learned building an SMB board set
  - From: curt mayer <cu...@zen-room.org>
- Re: lessons learned building an SMB board set
  - From: Frank Schieschke <f.schi...@googlemail.com>
- RE: [N8VEM-S100:4308] Re: lessons learned building an SMB board set
  - From: "John Monahan" <mon...@vitasoft.org>

Prev by Date: Re: Another route to write a CPM3 image to a CF card for the S100 IDE board
Next by Date: Re: Another route to write a CPM3 image to a CF card for the S100 IDE board
Previous by thread: RE: [N8VEM-S100:4308] Re: lessons learned building an SMB board set
Next by thread: Re: [N8VEM-S100:4308] Re: lessons learned building an SMB board set
Index(es):
- Date
- Thread