RE: [N8VEM-S100:2194] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.

To: "n8vem...@googlegroups.com" <n8vem...@googlegroups.com>

Subject: RE: [N8VEM-S100:2194] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.

Date: Mon, 6 Jan 2014 17:02:57 +0000

Accept-language: en-US

Authentication-results: gmr-mx.google.com; spf=pass (google.com: domain of j...@ckrubin.us designates 207.46.163.241 as permitted sender) smtp.mail=j...@ckrubin.us

In-reply-to: <041f1b58-f271-40c3-9137-a49f1f133f2c@googlegroups.com>

References: <a666dd6b-e680-44e4-a463-fa68d9e65472@googlegroups.com> <041f1b58-f271-40c3-9137-a49f1f133f2c@googlegroups.com>

Thread-index: AQHPCwACpjXJVxlCjkCTpYGLgxRxgZp36/dQ

Thread-topic: [N8VEM-S100:2194] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.

Thanks for the info – I’m not really following the backplane convo though I’d still like a few of the ATX boards.

Jack

From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of Ants Pants
Sent: Monday, January 06, 2014 10:55 AM
To: n8vem...@googlegroups.com
Subject: [N8VEM-S100:2194] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.

Hi Jack,

thickness is 2.0mm - this was discussed at length and with respect to the connectors, this i found to be the best option to using standard connectors with normal tail lenghts and pricing per unit (pricing started to get out of control over 2.6mm). IMHO 2.0mm should be quite ridged especially with the extra mounting holes added to the board.

--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+unsu...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.