Hi Todd,
That is really weird! I don't have that trouble here. Both consoles produce the same results.
See picture below... all commands were entered by the Hyper terminal Console.
What are you using for a back plane? Power supply?
That is really weird! I don't have that trouble here. Both consoles produce the same results.
See picture below... all commands were entered by the Hyper terminal Console.
What are you using for a back plane? Power supply?
> Date: Thu, 26 Feb 2015 19:19:54 -0600
> From: litte...@mchsi.com
> To: n8vem...@googlegroups.com
> Subject: Re: [N8VEM-S100:6456] Re: CP/M running, But now what ?
>
> Josh,
>
> I run the console and terminal at the same time.
>
> I noticed this anomaly while doing "dir's" of Disk A,B,C& D
> as I looked for the X-modem/Zork files you mentioned.
>
> When I do DIR from the console I see all files on both displays.
>
> When I do DIR from the terminal I see just the first file in the
> directory on both displays.
>
> Otherwise they echo each other on display/keyboard.
>
> I found the Zork 1-3 files, D: was blank, but I found nothing
> on the X-modem. Also I can't get zork to load... I can switch
> to the drive, but when I type ZORKx it just loads from the SD and
> drops to the prompt.
>
> Todd
>
>
>
>
>
>
>
>
>
>
>
> ----- Original Message -----
> From: "Crusty OMO" <cru...@hotmail.com>
> To: n8vem...@googlegroups.com
> Sent: Thursday, February 26, 2015 8:00:26 AM GMT -06:00 US/Canada Central
> Subject: RE: [N8VEM-S100:6453] Re: CP/M running, But now what ?
>
>
> Hi Jeffa, Todd,
>
> The latest image files on the wiki site include Martin Eberhard's X-Modem and some images with ZORK.
>
> Todd, I don't know why your RS-232 is only providing a partial directory.... that's very weird. Have you tried to connect the console I/O and the Terminal both at the same time? You can do this, and just watch the input from the other device. When you run DIR on the console I/O you should see the same output on both. Same goes for input from the terminal.
>
> The reason I prefer the terminal, is because you can use Martin's X-Modem in CP/M to upload/download files to the disk image.
>
> Yes, it would be nice to write some software that will read/write to the image files directly from windows, I just don't have the 16 hours to do this. Currently working on building a case for my Mark-8.
>
> Regards,
> Josh
>
>
>
>
> Date: Wed, 25 Feb 2015 20:02:46 -0800
> From: jeffrey.h...@gmail.com
> To: n8vem...@googlegroups.com
> Subject: [N8VEM-S100:6453] Re: CP/M running, But now what ?
>
>
>
>
>
> I see the monitor has a XModem UL/DL feature, or will I have to create a "DISK-A"
> image and introduce my own files into it using a PC ?
>
>
>
>
> Ditto for me. :-)
>
>
> What is the procedure for introducing files into the DISKxxx images? It sure would be nice to have a chooser to copy files into the DISKxxx images from the local ms/dos, linux or osx file systems.
>
>
> Or how about in the ROM. You put a file on the SD card and hit some menu option to save it to the currently mounted A> (or x>) drive.
>
>
> - jeffa
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com .
> For more options, visit https://groups.google.com/d/optout .
>
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com .
> For more options, visit https://groups.google.com/d/optout .
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> From: litte...@mchsi.com
> To: n8vem...@googlegroups.com
> Subject: Re: [N8VEM-S100:6456] Re: CP/M running, But now what ?
>
> Josh,
>
> I run the console and terminal at the same time.
>
> I noticed this anomaly while doing "dir's" of Disk A,B,C& D
> as I looked for the X-modem/Zork files you mentioned.
>
> When I do DIR from the console I see all files on both displays.
>
> When I do DIR from the terminal I see just the first file in the
> directory on both displays.
>
> Otherwise they echo each other on display/keyboard.
>
> I found the Zork 1-3 files, D: was blank, but I found nothing
> on the X-modem. Also I can't get zork to load... I can switch
> to the drive, but when I type ZORKx it just loads from the SD and
> drops to the prompt.
>
> Todd
>
>
>
>
>
>
>
>
>
>
>
> ----- Original Message -----
> From: "Crusty OMO" <cru...@hotmail.com>
> To: n8vem...@googlegroups.com
> Sent: Thursday, February 26, 2015 8:00:26 AM GMT -06:00 US/Canada Central
> Subject: RE: [N8VEM-S100:6453] Re: CP/M running, But now what ?
>
>
> Hi Jeffa, Todd,
>
> The latest image files on the wiki site include Martin Eberhard's X-Modem and some images with ZORK.
>
> Todd, I don't know why your RS-232 is only providing a partial directory.... that's very weird. Have you tried to connect the console I/O and the Terminal both at the same time? You can do this, and just watch the input from the other device. When you run DIR on the console I/O you should see the same output on both. Same goes for input from the terminal.
>
> The reason I prefer the terminal, is because you can use Martin's X-Modem in CP/M to upload/download files to the disk image.
>
> Yes, it would be nice to write some software that will read/write to the image files directly from windows, I just don't have the 16 hours to do this. Currently working on building a case for my Mark-8.
>
> Regards,
> Josh
>
>
>
>
> Date: Wed, 25 Feb 2015 20:02:46 -0800
> From: jeffrey.h...@gmail.com
> To: n8vem...@googlegroups.com
> Subject: [N8VEM-S100:6453] Re: CP/M running, But now what ?
>
>
>
>
>
> I see the monitor has a XModem UL/DL feature, or will I have to create a "DISK-A"
> image and introduce my own files into it using a PC ?
>
>
>
>
> Ditto for me. :-)
>
>
> What is the procedure for introducing files into the DISKxxx images? It sure would be nice to have a chooser to copy files into the DISKxxx images from the local ms/dos, linux or osx file systems.
>
>
> Or how about in the ROM. You put a file on the SD card and hit some menu option to save it to the currently mounted A> (or x>) drive.
>
>
> - jeffa
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com .
> For more options, visit https://groups.google.com/d/optout .
>
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com .
> For more options, visit https://groups.google.com/d/optout .
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.