Re: [N8VEM-S100:7003] S100 extender board

[Todd Goodman <tacom...@gmail.com>]

Yes, I still have lots of extender boards.  I also have S-100
connectors (you'll have to decide for yourself if the leads are long
enough for the top connector, though some people certainly use them
for that purpose.)

Todd

On Mon, May 11, 2015 at 10:24 AM, Gary Kaufman <geka...@gmail.com> wrote:
> Todd Goodman (tsg <at> bonedaddy.net) has them, according to the inventory
> he still has 44.  If he's out I probably have one I could spare.
>
> The fuse issue was on the last revision of the 8 slot backplane.  The N8VEM
> extension is fused correctly.
>
> - Gary
>
>
> On Monday, May 11, 2015 at 9:27:11 AM UTC-4, Jeff Albrecht wrote:
>>
>> Do you have anymore? I can't check the inventory page right now because
>> anonymous access to n8vem-sbc.pbworks.com is not currently configured to
>> allow it.
>>
>> This weekend I was working on a SSM IO4. caps were shorting with loud
>> BANGs and smoke. It took out the ground and -16vdc traces on an old
>> fuse-less extender. My old faithful Bob Mullen already had a bad edge
>> connector near the +/- 16vdc rails. I'd like an extender with re-settable
>> fuses and power indicators that show status of power at the edge connector.
>>
>> What's the current status of the Extender? I seem to remember some
>> discussion about the fuses being mis configured, only protecting the LEDs?
>>
>> Do you have any edge connectors on hand?
>>
>> What I'm hoping in an extender is
>> extension
>> logic analyzer
>> power rails re-settable fused
>>
>> c ya.. - jeffa
>>
>>
>>
>> On Monday, May 11, 2015 at 4:38:01 AM UTC-7, Tom Lafleur wrote:
>>>
>>> I have one, $20+3.   $23
>>>
>>>
>>> i~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~i
>>>
>>> Tom Lafleur
>>>
>>>
>>> On May 10, 2015, at 11:33 PM, Ian McLaughlin <i....@platinum.net> wrote:
>>>
>>> Hello,
>>>
>>> Does anyone have a S100 extender board that they'd be willing to let go
>>> of for a reasonable price? I'm in need of a second one for some debugging
>>> I'm working on.
>>>
>>> Thanks!
>>>
>>> Ian
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "N8VEM-S100" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to n8vem-s...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to n8vem-s100+...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.