Hi Leonard, sorry to hear you are having difficulties. In general I sorry to say I cannot get the time to dig in and debug problems like this. I wish I could but I honestly cannot find the time. Each S-100 board I do takes ~100 hours of research work and typically 2 prototypes (some as much as 4 (ZFDC, VGA Board). I have a backlog of some 5 prototype boards in the works currently! This is strictly a hobby. All the prototypes I pay out of pocket (at $150 a board). Anyway the best I can do is direct you to Tom Lafeur (laf...@lafleur.us) who has succeeded in a somewhat similar situation. Note to Tom: Tom could you help him out, I’m thinking if one person could help the next we could solve these types of issues. Also I might be best to do it over the S100Computer forum since others will not come up with the same issues. Good luck Leonard. BTW you will need at least 256K of RAM for the CPM3 system I have on the web site. Use the 512K Static RAM chips on the 4Mg Board Jameco and others have them, very fast, very reliable. From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of lcyoung Hi John Since I'm using the 2-port serial I/O board at A0H, with the Z80 cpu and Master monitor, and the 4Meg ram bd (with 2 chips set for 64K RAM), plus your ZFDC and IDE cards and the whole thing seems to be running well with the Monitor... Seems like the time to try to get CPM going. Not sure if your disk images will work, since I think your console is at 0H. I found the CPM source here http://www.uxpro.com/cpm/www.cpm.z80.de/source.html . I know the BIOS has to know the params for my 3.5 or 5.25 in. floppies (not to mention the 80 Meg HD), and I know I have to patch the terminal I/O. Would you have some useful info for me to work from? I tried to read the HD and 3.25 inch DD floppies written my Andrew's SBC system, (which I had no problem building); but I get read errors on these from the S100 system- maybe the disk format is wrong, or the CPM operating system is not where it is expected to be for S100? Also, I used SIMH to patch the MYIDE rom data to test my hard drive, and it seems ok. Help please, if you have some time. I might be able to make CPM go-eventually; but it seems expeditious to ask first. Thank you Leonard Young From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of John Monahan Never really used copysys. I seem to remember it counts on a certain disk (sec/track) setup. I just copy User group 0 *.* [S] across and then use HSYSGEN (ZSYSGEN for floppys), which puts system boot on CFCARD or floppy. Remember to do ERA *.* on a new CF card to cleanup the directory sector(s) on a windows formatted card before doing anything else. John John Monahan Ph.D e-mail: mon...@vitasoft.org Text: mon...@txt.att.net From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of Tom Lafleur yes, DD is there as well as DDD On Tue, Nov 20, 2012 at 9:49 AM, John Monahan <mon...@vitasoft.org> wrote: No leave as is Tom. Most should be recognizable as well known CPM programs. I just realized that the Hidden/System files may not be on that CF card. Could you check if the file DD.COM (displays all files in a user group) is there. It is a System file so use DIRS to see those. PCGET is used to download a file from a PC (also a system file) should be there, see here:- http://s100computers.com/Software%20Index%20Page.htm to use it. CPM86- brings a ZFDC 8” floppy (only) version of CPM86 CPM86 boots from the IDE Board but also includes 8”&5” disks on the ZFDC board Some of the others… PIP22 is the old CPM V2.2 PIP CPM3-OK.SYS is a backup of CPM3.SYS (in case of screw-ups). CPM3-ZF.SYS boots with ZFDC 8” floppy as the A: drive (For use on floppy boots). FLUSH is just the force a new page on a HP laser printer (using CPM3 P Command) Other non DR programs are to test/use our S-100 boards Andrew & I made. They generally sign on with a menu. Can remove All .hex files XXX.* From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of Tom Lafleur Sorry about that, shall I remove the files from the site?? That will be easy, will tell other more to come soon as I/You clean them up On Tue, Nov 20, 2012 at 8:43 AM, John Monahan <mon...@vitasoft.org> wrote: Great Tom, Just FYI, CPM86 files are in user group 1. If you have the setup below along with the 8086 related our boards(s) you should be able to boot directly CPM86 with the file CP/M 3.0 program CPM86.COM . BTW, I had not figured on all those files going out to everybody as is. There are some small test programs in there to test prototype hardware I am working on. Will not make sense and probably crash in other systems. From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of Tom Lafleur Here are John's images for sharing with the full MD5 hash in the file name... they are 4gb at this time and if using in S100 IDE reader, John's IDE board supports this 4GB Kingston CF card with the flowers on it: The two images from John Monahan have been posted on the server at these URL's... On Tue, Nov 20, 2012 at 6:40 AM, oscarv <vermeul...@gmail.com> wrote: Tom,
Insert a CF or SD card into your card reader... (after the program is started) --
|