Everybody, I’m thinking of doing an 8088 CPU board as a stepping stone
for people going from a Z80 to 8086 board. They have 90% the same
circuit but of course would work with “old RAM/ROM boards/ports” and
make it easier for people to make the transition into the 16 bit world.
Clearly to switch over to 8086 you would later need the 8086 board, and
8086 CPU (and 16 bit RAM), that’s about it. You could use all the other
8088 board chips.
there be an interest?
Hi! Attached is the S-100 board PCBs waiting
Please review and send me additions and/or
My plan is to get the S-100 MS DOS Support board
PCBs next, then reorder the S-100 IDE board PCBs, and then the S-100
Next would be the S-100 backplane PCBs and we’ll
see how things are once those go through.
Thanks and have a nice day!