Hi Gary,
I compared your picture to my board and jumpers are the same BUT one thing I did notice,
Check C67 directly beneath the 80386 chip, have you mistakenly fitted a 0.1UF here as it looks the same type as the cap next to it (C18 which is a 0.1uf)
C67 should be a 47pf and is in the master/slave area of the circuitry.
I only noticed it because on my board the 47pf is blue and the 0.1 next to it is yellow :-)
best regards
David Fry
On Friday, February 6, 2015 at 4:42:55 AM UTC, Gary Kaufman wrote:
John -
Thanks, that helps narrow things down!
- Gary
On 2/5/2015 10:53 PM, John Monahan wrote:
Jumper
looks exactly as I have Gary.
John