From:
n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of Kipp Yeakel
Sent: Sunday, February 20, 2011
11:48 AM
To: n8vem...@googlegroups.com
Subject: Re: [N8VEM-S100:67] The
S-100 4MB SRAM and PPIDE boards have arrived!
----- Original Message -----
Sent: Sunday, February
20, 2011 10:17 AM
Subject: [N8VEM-S100:64]
The S-100 4MB SRAM and PPIDE boards have arrived!
Hi! Sorry for the long email! Here is an update
on recent developments and near term plans.
I have received the S-100 4MB SRAM boards. They are
$20 each plus $3 shipping in the US or $5 elsewhere. I have
several builders on the waiting list and plenty of boards so please get as many
as you would like. There is more information available at John’s
website
http://s100computers.com/My%20System%20Pages/RAM%20Board/4MG%20RAM%20Board.htm
The PPIDE boards also arrived so you can use the IDE and CF
devices with the N8VEM SBC V1, SBC V2, and SBC-188. They are $5 each with
$1 shipping in the US
and $2 elsewhere. More information on the PPIDE is available here:
http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=PPIDE
John and I are redesigning the S-100 IDE interface
board. It will have improved diagnostic display and support dual CF
adapters in addition to IDE hard drives. We have a prototype board
underway and manufactured PCBs should be available in several weeks.
http://s100computers.com/My%20System%20Pages/IDE%20Board/My%20IDE%20Card.htm#Version%202%20Update%20of%20IDE%20Board
We are also updating the S-100 EPROM board to make
corrections and improvements from the original version. I am not certain
when those will be available but anticipate sometime in the spring.
http://s100computers.com/My%20System%20Pages/PROM%20Board/PROM%20Board.htm
I am getting ready to order some of the ECB Dual DMA IDE
boards. Hopefully these should be here in a few weeks.
http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=ECB%20Dual%20DMA%20IDE
Also I am planning to order some of the ECB bus extender
boards Michael Haardt designed
http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=ECB%20bus%20extender
Thanks and have a nice day!
Andrew Lynch
PS, if you want to save a bit on shipping, I also have a
variety of other boards available
|
ECB
|
|
|
|
|
|
Cassette Interface
|
13
|
|
Disk IO
|
11
|
|
Prop IO
|
12
|
|
ECB Backplane (8 slot)
|
8
|
|
SBC V2
|
1
|
|
SBC-188
|
10
|
|
4MEM
|
14
|
|
Prototyping board with IO decode
|
6
|
|
Zilog Peripherals
|
15
|
|
SCG
|
3
|
|
ECB Bus Monitor
|
4
|
|
MSX Cartridge reader
|
7
|
|
DSKY
|
6
|
|
uPD7220 V2 prototype
|
5
|
|
ECB Extended backplane (12 slot)
|
11
|
|
6x0x host processor
|
15
|
|
6x0x ECB backplane
|
16
|
|
6x0x IO mezzanine
|
12
|
|
VDU
|
13
|
|
4MB RAM-Floppy
|
5
|
|
4PIO
|
6
|
|
|
|
|
S-100
|
|
|
|
|
|
4MB SRAM
|
30
|
|
parallel ASCII keyboard
|
5
|
|
regular prototyping board
|
1
|
|
PIC/RTC
|
0
|
|
|
|
|
Mini Boards
|
|
|
|
|
|
PPIDE
|
19
|
|
AT2XTKBD
|
29
|
|
ECB to Z80 socket adapters
|
11
|
|
Juha SD
|
5
|
|
SCSI to IDE prototypes
|
4
|
|
XT-IDE (ISA bus)
|
16
|