[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: S-100 System Monitor Board V2 building hints and experiences

To: n8vem-s100@googlegroups.com
Subject: Re: S-100 System Monitor Board V2 building hints and experiences
From: Edward Snider <zipps...@gmail.com>
Date: Wed, 6 Aug 2014 04:53:00 -0700 (PDT)
In-reply-to: <3bba8f04-bbbb-4efd-ac55-4e70d6c59b60@googlegroups.com>
References: <ce5ff90d-ca93-45d6-af7f-0ab7e2f26c26@googlegroups.com> <3bba8f04-bbbb-4efd-ac55-4e70d6c59b60@googlegroups.com>

Thanks Frank,

I was just about to ask if someone could recommend switches for this.

Ed

On Tuesday, August 5, 2014 3:04:48 PM UTC-5, Frank Schieschke wrote:

NKK M2022SS1W03 for STOP/RUN SW
NKK M2012SS1W03 for BP SW
NKK M2015SS1W03 for RESET / SLAVE CLEAR / SINGLE STEP SW

View catalog (A48) for variants of paddles etc. http://www.nkkswitches.com/pdf/Toggles.pdf

Take care about the correct direction of inserting for the switches for Single Step, Reset and Slave Clear.
Frank

References:
- S-100 System Monitor Board V2 building hints and experiences
  - From: Frank Schieschke <f.schi...@googlemail.com>
- Re: S-100 System Monitor Board V2 building hints and experiences
  - From: Frank Schieschke <f.schi...@googlemail.com>

Prev by Date: An 8085 S-100 Board
Next by Date: Re: [N8VEM-S100:4846] An 8085 S-100 Board
Previous by thread: Re: S-100 System Monitor Board V2 building hints and experiences
Next by thread: S-100 System Monitor Board V2 building hints and experiences
Index(es):
- Date
- Thread