Dave I have not had a problem with that board with the Propeller Console IO board at all. Have not run it with the IDE board. That said I could only get about 6MHz out of a 10Hz chip. I know Todd is about to order another batch, we should resolve this ASAP
I'm MIA for two weeks unfortunately
John
John Monahan (mon...@vitasoft.org)
Hi--Wondering if people have been using the 68K board. I think I have timing issue because pWR* is going HI at the same time the data is being released. You can see this in attached LA capture. I think that is why I am not getting characters from the prop console and probably explains why I have not gotten reliable data from the IDE card either. The dual serial card and memory work just fine. I have tried different clocks as well - this one is at 2MHz so that should not be the issue. Was wondering if someone had seen this and resolved. I will dig through the schematics and the Wilcox book as well. I think once I have this resolved, I can get CP/M 68K going.Thanks in advanceDave
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.