[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:3986] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.

To: n8vem-s100@googlegroups.com
Subject: Re: [N8VEM-S100:3986] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
From: Vince Mulhollon <vincemu...@gmail.com>
Date: Sun, 8 Jun 2014 07:58:30 -0700 (PDT)
In-reply-to: <CAF-r0Y2+2fG5PgOXy6bR9oF87gM7C0cUwSZt2ytM8=hH4za+mQ@mail.gmail.com>
References: <a666dd6b-e680-44e4-a463-fa68d9e65472@googlegroups.com> <3ac0d097-9bea-48a8-b758-fafd6254deea@googlegroups.com> <17af1e6b-bd56-4373-97a5-07291112f339@googlegroups.com> <CAF-r0Y2+2fG5PgOXy6bR9oF87gM7C0cUwSZt2ytM8=hH4za+mQ@mail.gmail.com>

On Saturday, June 7, 2014 4:35:07 PM UTC-5, Alexander wrote:

The URL is http://www.digikey.com/short/2dr0v

I just get a blank fast add screen at digikey.

Curious if its the same trimmer pot at the bus terminator card; also whats the "best" trimmer for that job WRT pin spacing.

References:
- Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
  - From: Ants Pants <rota...@gmail.com>
- Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
  - From: Ants Pants <rota...@gmail.com>
- Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
  - From: nbreeden <nbre...@me.com>
- Re: [N8VEM-S100:3986] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
  - From: "J. Alexander Jacocks" <jjac...@gmail.com>

Prev by Date: Re: S100 IDE Version 02 - Silkscreen Error
Next by Date: Re: MYIDE
Previous by thread: Re: [N8VEM-S100:3986] Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
Next by thread: Re: Interest, Discussion and R&D on a 18 Slot S100 Backplane & ATX PSU board.
Index(es):
- Date
- Thread