[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:4938] Re: ZFDC Controller under control of the PC-BIOS??


I haven't had time for any extensive testing, but was able to boot to a prompt.  What a great feeling :)

One curiosity is that the V2.9 ZFDC.HEX file cleared the display to "00000" and then began rolling the first two digits.  This later V3.5 ZFDC.HEX leaves a "3" in the far right digit.  I'll have to look thru the code, but is this an error message?

John (and Frank), thanks so much.

- Gary

On 8/15/2014 3:59 PM, John Monahan wrote:

That’s great news Frank!  Gary, how about you?




From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of Frank Schieschke
Sent: Friday, August 15, 2014 12:39 PM
To: n8vem...@googlegroups.com
Subject: [N8VEM-S100:4937] Re: ZFDC Controller under control of the PC-BIOS??


Hello John,
Thanks for the version 3.5 that you published on your site.
I just burn the EEPROM.
And now i am able to boot MS-DOS (in my case 3.3) from the floppy disk.