Or one or two cards in the motherboard From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of James Cobb Sounds like they need bleeder resistors on the big caps. Jim From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] >> Subject: [N8VEM-S100:7056] Compupro S100 box on eBay >> I have 4 boxes (different types) so cannot justify another, but in anybody in this group would like a large >> http://www.ebay.com/itm/CompuPro-S-100-System-Case-Motherboard-PS-Ready-to-Run-Nice-Condition- Yes, this is a very nice frame. I have one. If you buy it, just be careful. The power supply has quite a "bite" even after it is powered off. It might be a good idea to get one of the bus monitor cards that are offered here to be able to monitor the +8, +/-16 rails after the box is turned off. Mine motors on for 3 to 5 minutes after!!! -- -- |