|
Todd,
It looks good. I see you did the 2 jumpers from the back. Did you solder the SD card socket to the mounting pads on the left and right side of the socket? I usually like to put a large blob of solder there to hold the SD socket, I figure that's the only way it's being held in place. Remember, all electronic chips work because there's magical smoke inside them, the trick to keeping them working is to not let the smoke out. Cheers, Josh > Date: Sat, 31 Jan 2015 19:51:02 -0600 > From: litte...@mchsi.com > To: n8vem...@googlegroups.com > Subject: Re: [N8VEM-S100:6165] May I have a folder ? > > Ok, so I gave it a try, Google it is. > > Here's my lame web site ;-) > > https://sites.google.com/site/litterbox99/ > > I'm almost done with the board. In the morning > I'll plug it in with no IC's and verify the the > various voltage regulators are doing their job > and go forward.... > > Todd > > -- > You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. |