[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Z80 CPU board - D2/D3 port timing problem

To: n8vem-s100@googlegroups.com
Subject: Re: Z80 CPU board - D2/D3 port timing problem
From: Frank Schieschke <f.schi...@googlemail.com>
Date: Fri, 31 Oct 2014 12:40:12 -0700 (PDT)
In-reply-to: <3ba55519-d72c-41ef-827b-80a9fdff587e@googlegroups.com>
References: <3ba55519-d72c-41ef-827b-80a9fdff587e@googlegroups.com>

Hi Philippe,
again, use an active terminator and also the problem with the I/O ports are going away.
I also have to going through this experiences.

Frank

Follow-Ups:
- Re: Z80 CPU board - D2/D3 port timing problem
  - From: Philippe Elie <philip...@gmail.com>

References:
- Z80 CPU board - D2/D3 port timing problem
  - From: Philippe Elie <philip...@gmail.com>

Prev by Date: Re: Z80 CPU board - D2/D3 port timing problem
Next by Date: 80386 CPU Board - Component type/value clarification
Previous by thread: Re: Z80 CPU board - D2/D3 port timing problem
Next by thread: Re: Z80 CPU board - D2/D3 port timing problem
Index(es):
- Date
- Thread