[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: finished case with SMB installed

To: n8vem-s100@googlegroups.com
Subject: Re: finished case with SMB installed
From: Frank Schieschke <f.schi...@googlemail.com>
Date: Mon, 18 Aug 2014 03:08:53 -0700 (PDT)
In-reply-to: <996c2ef6-c4e8-4c87-9fa5-8919cab42736@googlegroups.com>
References: <996c2ef6-c4e8-4c87-9fa5-8919cab42736@googlegroups.com>

Hello Philippe,
the backplane is a Vector 8803 with 11 slots. It has active termination for all signals. Also CompuPro sells this backplane.
The 12V 120mm fans in my picture are supplied by the +8V power supply. So the noise is acceptable and the airflow is enough.
The grey mounting plate for the two fans devide the enclosure in two parts, so there is no backflow of the air.
When you go to CPUs like e.g. 80286 the greater airflow is needed essentially.
Frank

References:
- finished case with SMB installed
  - From: Philippe Elie <philip...@gmail.com>

Prev by Date: Re: finished case with SMB installed
Next by Date: Re: finished case with SMB installed
Previous by thread: Re: finished case with SMB installed
Next by thread: Re: finished case with SMB installed
Index(es):
- Date
- Thread