[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:3517] Re: Help with Dual CF S-100 IDE VERSION 02

To: n8vem-s100@googlegroups.com
Subject: Re: [N8VEM-S100:3517] Re: Help with Dual CF S-100 IDE VERSION 02
From: geka...@gmail.com
Date: Wed, 7 May 2014 07:31:55 -0700 (PDT)
In-reply-to: <CAJj77rsja_ULV3z0AeRzzyN_wXjbOJ64hFwybMGVH8Ad7RxZ-A@mail.gmail.com>
References: <905034b5-14e6-4e60-aa1a-3a3603feaf5b@googlegroups.com> <9ff1474d-f0f1-443f-9c97-7ce0ff7841fc@googlegroups.com> <CAJj77ruSSSrUj+0A6QEyA2NE-GeRenhUOX36hy=9OTPRn2ht3w@mail.gmail.com> <1a56cdea-6b77-4f76-bbd0-39cb63a60753@googlegroups.com> <CAJj77rsja_ULV3z0AeRzzyN_wXjbOJ64hFwybMGVH8Ad7RxZ-A@mail.gmail.com>

I've also used the SyBA adapter on the older "single ide" board, and it works fine.

I ordered a Chinese cheapie adapter board from ebay, and had no luck getting it to work. As the SyBA board is only about $7, it's a no-brainer.

I built up most of the Dual CF V02 board last nite. I'm missing the 680 ohm SIP and dip switch so couldn't test everything, but the LED's and TIL311's work nicely :)

- Gary

References:
- Help with Dual CF S-100 IDE VERSION 02
  - From: nbreeden <nbre...@me.com>
- Re: Help with Dual CF S-100 IDE VERSION 02
  - From: David Fry <dgf...@googlemail.com>
- Re: [N8VEM-S100:3515] Re: Help with Dual CF S-100 IDE VERSION 02
  - From: Paul Birkel <pbi...@gmail.com>
- Re: [N8VEM-S100:3515] Re: Help with Dual CF S-100 IDE VERSION 02
  - From: Edward Snider <zipps...@gmail.com>
- Re: [N8VEM-S100:3517] Re: Help with Dual CF S-100 IDE VERSION 02
  - From: Paul Birkel <pbi...@gmail.com>

Prev by Date: Re: Run of S100 - Propeller Driven Console IO board
Next by Date: Looking for a few boards....
Previous by thread: Re: [N8VEM-S100:3517] Re: Help with Dual CF S-100 IDE VERSION 02
Next by thread: Looking for a few boards....
Index(es):
- Date
- Thread