[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [N8VEM-S100:3049] Re: PSU



Hello Thierry,
it is not so scary to choose a correct type of power supply.
Look in the datasheet, there is a "current range".
If the "current range" is 0.5 - 5A in the case of the RT-50C at +5V you have to have a minimal current of 0.5A.
You can meet this requirement by using a dummy load (e.g. a lamp or resistor which presents a load of appr. 2.5W).
Also you have to know, that when the voltage is adjustable on channel 1 on an dual or triple channel PS,
the voltage on channel 2 or 3 also increases when you increase the voltage on channel 1 or vice versa.

Frank