Re: [N8VEM-S100:5329] FP MIni Board heat sink

[Richard Cini <rich...@verizon.net>]

Are you afraid of the traces right behind the pour? I guess mount the mica
washer rotated towards the right rather than towards the pins?

Good thing I didn’t solder mine in yet.

Rich

--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32




On 10/6/14, 9:08 PM, "John Monahan" <mon...@vitasoft.org> wrote:

>There are quite a few LED's on the board so the regulator will run hot
>with
>a small heat sink. I always like to use the larger ones remembering in
>electronics, "heat kills".  There is plenty of room anyway. See picture.
>
>John
>
>
>-----Original Message-----
>From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On
>Behalf Of Richard Cini
>Sent: Monday, October 6, 2014 5:46 PM
>To: S100-Post
>Subject: Re: [N8VEM-S100:5328] FP MIni Board heat sink
>
>What? Maybe I missed something somewhere. Where is there a risk of a
>short?
>I don¹t see where the HS would contact anything other than the pour under
>the HS.
>
>Rich
>
>--
>Rich Cini
>Collector of Classic Computers
>Build Master and lead engineer, Altair32 Emulator
>http://www.classiccmp.org/cini
>http://www.classiccmp.org/altair32
>
>
>
>
>On 10/6/14, 8:10 PM, "John Monahan" <mon...@vitasoft.org> wrote:
>
>>Just a reminder guys, be sure and use a mica washer under the 5V
>>regulator heat sink  to prevent ground shorting  on LHS front of board.
>>John
>>
>>
>>-----Original Message-----
>>From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com]
>>On Behalf Of Don Caprio
>>Sent: Saturday, October 4, 2014 5:24 PM
>>To: n8vem...@googlegroups.com
>>Subject: [N8VEM-S100:5319] FP MIni - International Shipments
>>
>>Guys,
>>
>>I completed the remaining international shipments today.
>>
>>I don't have time to go through the list and figure who paid shipping
>>and who are awaiting totals.
>>
>>This is on the honor system. If you pad sufficient postage ok, cool.
>>If not please send the balance.
>>
>>Matt Turner       $9.50
>>Ian McLaughlin    8.24
>>Leon Byles         13.41
>>Nik Brisevac       13.41
>>Fabio Battaglia    20.07
>>Malcom Macleod 26.73
>>
>>Thank you.
>>
>>--
>>Don Caprio
>>ilv...@gmail.com
>>
>>--
>>You received this message because you are subscribed to the Google
>>Groups "N8VEM-S100" group.
>>To unsubscribe from this group and stop receiving emails from it, send
>>an email to n8vem-s100+...@googlegroups.com.
>>For more options, visit https://groups.google.com/d/optout.
>>
>>
>>--
>>You received this message because you are subscribed to the Google
>>Groups "N8VEM-S100" group.
>>To unsubscribe from this group and stop receiving emails from it, send
>>an email to n8vem-s100+...@googlegroups.com.
>>For more options, visit https://groups.google.com/d/optout.
>
>
>--
>You received this message because you are subscribed to the Google Groups
>"N8VEM-S100" group.
>To unsubscribe from this group and stop receiving emails from it, send an
>email to n8vem-s100+...@googlegroups.com.
>For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google Groups
>"N8VEM-S100" group.
>To unsubscribe from this group and stop receiving emails from it, send an
>email to n8vem-s100+...@googlegroups.com.
>For more options, visit https://groups.google.com/d/optout.