Thanks John! That’s great!
As soon as the board completes trace route optimization I will send it for “production” boards.
More announcements to come!
Thanks and have a nice day!
Andrew Lynch
From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of monahanz
Sent: Tuesday, September 03, 2013 1:09 AM
To: n8vem...@googlegroups.com
Subject: [N8VEM-S100:1863] A new S-100 Bus general purpose 1MG Static RAM + EPROM S-100 Board.
[ ]About two years ago Andrew and I made an S-100 bus E-PROM board that could utilize a number or RAM and ROM chips. It proved very popular. All production quality boards were quickly taken. A second "V2" version of the board was later made. That too went quickly.
A number of people have requested an "All in One" RAM/ROM combination board capable of working in 8 or 16 bit S-100 systems with pre or post IEEE-696 CPU boards and capable of accepting a wider range of UV-EPROMS, EE-PROMS, Static RAM chips and Flash-RAM chips. Also in view of the range of chips and CPU's a flexible wait state circuit that can independently assign 0-8 wait states to the above chips would be desirable. Finally, it would be nice if the EPROMs could be phantom/shadowed in or out depending on which CPU is controlling the S-100 bus. For example one normally would not want a Z80 monitor at F000H if the bus has given control to an 8086 in a 1MG address space.
See here for a description of such a board:-
http://www.s100computers.com/My%20System%20Pages/RAM&ROM%20Board/RAM&PROM%20Board.htm
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.