I have to agree. I don’t like the idea of having to modify components. I would sooner search for 9-pin R-nets, even if paying a premium, than to cut off one of the resistors. There really is no utility to passing the +/-16V through the inter-board cable, as one would necessarily, out of good practice, apply these power inputs on both boards. Bob Bell From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of John Parsons Please don't leave the +/- 16 connected to the r-packs. Having to cut pins off is something easy to miss in the assembly. Especially for those of us who are just starting to assemble boards. -- |