Hi Harold, These boards are not made or supplied by a commercial outfit. They are made and utilized by a group of hobbyists. When a new board is developed a posting is made on a few relevant web forums such as this group, and on www.S100Computers.com. A group purchase to have a bunch of boards is done. Typically one person volunteers to handle the order (I often do first orders). Typically 20-30 boards go into a new board batch order resulting in boards costing about ~$15 a board. Unfortunately (for you) this has been going on for a few years now so most people have their basic S100 boards and are moving “up” to more sophisticated ones. So for you to get a board you would have to start or wait to do another batch of these boards yourself and/or get others to join in. We have a company called PCBcart.com make the boards for us. The Gruber files are available here (http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=S-100%20Boards ). I or others can help you setup an order, but remember there is a setup/processing/shipping fee (~$150) for any initial board. From time to time I or others come out with second (or third) improved versions on these boards (so far we have done about 36 different boards). This is often when newer users join in. In fact if you even think you will need a board, that is the time to get one. Unfortunately there has not been a real need for an update on that IDE board at the moment (although if a run is made one minor tweak could be incorporated). Hope the above helps you and others that may be interested in these boards John From: n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com] From: hl...@aol.com [mailto:hl...@aol.com] I would like to purchase the S100 Dual IDE board that is listed on the N8VEM site. I do not know how to order. Thanks, Harold -- |