My objective is a reliable board too, either manufacturer seems to provide that, But gold plating is good :-)
You can go with either manufacturer, my order stands at 2x and delay is not an issue for me.
--Hi Todd,there's been a little cross over in the posts, If you look back a couple of post's Andrew mentioned that he has used PCBcart for orders of 10 PCB's on other prototype runs.The consensus last night was to go with 4pcb.com but in light of Andrews 'endorsement' of PCBcart I thought It worth throwing out the question to Dave and Fabio one more time before you process the order.I'm happy either way I just want a reliable board, if we go 4pcb.com then my order number stands (at 1 pcb) but if we go with PCBcart then I will take another pcb (2 pcbs total) to help spread the cost, delivery time is not an issue to me particularly just want to keep the ball rolling till the order is placed :-)regardsDavid Fry
On Saturday, April 26, 2014 5:56:07 PM UTC+1, monahanz wrote:I think we need to do a prototype run on that board first. While it contains elements of 3 previous boards we did, it is the first time they are all put together in one place. Also as a few of us know, we had real problems with that BT478 chip on the VDP board (which itself BTW needs to have another prototype run).
On the 7220 I will help out with the hardware, the thing to remember about the 7220 is you have to do quite a bit of software writing to get it to be of any use. Is somebody prepared to do that. Because without software that chip/board is useless.
John
From: n8ve...@googlegroups.com [mailto:n8vem...@googlegroups.com] On Behalf Of David Fry
Sent: Saturday, April 26, 2014 7:40 AM
To: n8ve...@googlegroups.com
Subject: Re: [N8VEM-S100:3295] S-100 boards in work
Hi Ed,
Andrew has uploaded the EDA files for the uPD7220 GDC this afternoon, if you feel inclined to do a production run then put me down for 1 board
just for curiosity value. It might be worth considering a smaller run of 5 to 10 boards as this board has failed to spark sufficient interest for a production run
before. looking a previous forum posts for the uPD7220 GDC it would appear to be a descendant of the ECB uPD7220 graphics board interfaced to the S100 bus and is ripe for testing.
Regards
David Fry
On Friday, April 25, 2014 11:19:04 PM UTC+1, Edward Snider wrote:It does seem like it would be an interesting board for an S100 system.
With almost all of the work done it would be a shame not to go through to completion.
Unfortunately I don't have enough of a system together to help in testing, but I can chip in a bit
for prototypes. I'd also be willing to handle the production run if we can get takers for at least
20 boards, if that would be helpful.
Ed
On Tuesday, September 24, 2013 1:45:38 AM UTC-5, nekonoko wrote:Hi Andrew,
I can definitely see chipping in at least some of the cost. I find the uPD7220 GDC interesting as several business class CP/M systems used it for graphics (DEC Rainbow, QX-10 etc.).
Thanks much,
Pete--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.