[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [N8VEM-S100:6119] RFC - S100 Bus Test Point PCB

To: n8vem-s100@googlegroups.com
Subject: RE: [N8VEM-S100:6119] RFC - S100 Bus Test Point PCB
From: Kipp Yeakel <kye...@stny.rr.com>
Date: Thu, 29 Jan 2015 15:16:45 -0800 (PST)
In-reply-to: <05a601d03c0e$362cf8b0$a286ea10$@gmail.com>
References: <54C9E598.1010700@gmail.com> <8D209F78D18E7B1-1120-755F@webmail-vm158.sysops.aol.com> <CAPan+1RK+BMxChNh+ebf5JZUBphAB7Q+XoZP27OnPxcRyjKGVQ@mail.gmail.com> <005701d03bec$aff69d80$0fe3d880$@vitasoft.org> <54CA791E.6050501@gmail.com> <05a601d03c0e$362cf8b0$a286ea10$@gmail.com>

I'd take 2 of these as well. Suggestion, place the GND away from the power pins and make it large enough to clip my logic probe or scope GND to. Could also be 2 through holes that we could solder a loop of wire into.
Thanks,
Kipp

References:
- RFC - S100 Bus Test Point PCB
  - From: Don Caprio <ilv...@gmail.com>
- Re: [N8VEM-S100:6101] RFC - S100 Bus Test Point PCB
  - From: norwe...@aol.com
- Re: [N8VEM-S100:6112] RFC - S100 Bus Test Point PCB
  - From: Don Caprio <cap...@uxpro.com>
- RE: [N8VEM-S100:6113] RFC - S100 Bus Test Point PCB
  - From: "John Monahan" <mon...@vitasoft.org>
- Re: [N8VEM-S100:6116] RFC - S100 Bus Test Point PCB
  - From: Don Caprio <ilv...@gmail.com>
- RE: [N8VEM-S100:6119] RFC - S100 Bus Test Point PCB
  - From: "Bob Bell" <bbel...@gmail.com>

Prev by Date: RE: [N8VEM-S100:6119] RFC - S100 Bus Test Point PCB
Next by Date: RE: [N8VEM-S100:6128] RFC - S100 Bus Test Point PCB
Previous by thread: RE: [N8VEM-S100:6119] RFC - S100 Bus Test Point PCB
Next by thread: RE: [N8VEM-S100:6128] RFC - S100 Bus Test Point PCB
Index(es):
- Date
- Thread