[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ZFDC Controller under control of the PC-BIOS??

To: n8vem-s100@googlegroups.com
Subject: Re: ZFDC Controller under control of the PC-BIOS??
From: Frank Schieschke <f.schi...@googlemail.com>
Date: Tue, 29 Jul 2014 23:38:29 -0700 (PDT)
In-reply-to: <51d0561b-80ad-4710-831a-303ceb6c57e8@googlegroups.com>
References: <51d0561b-80ad-4710-831a-303ceb6c57e8@googlegroups.com>

As i mention earlier, under ZFDCDIAG all functions of the controller and drives are available without any error.
Today morning i jumper the 80286 board to a single master, so the the Z80 is out off the system.
This shows the same behavior as prior with the Z80.
Booting from the CF-Card working already fine.
Is there a MS-DOS version of the ZFDCDIAG program ?
Is the version of MS_DOS which is on the 3.5" disk important for booting?

Frank

Follow-Ups:
- RE: [N8VEM-S100:4744] Re: ZFDC Controller under control of the PC-BIOS??
  - From: "John Monahan" <mon...@vitasoft.org>

References:
- ZFDC Controller under control of the PC-BIOS??
  - From: Frank Schieschke <f.schi...@googlemail.com>

Prev by Date: "Pin In Paste" Soldering of S-100 Connectors
Next by Date: Re: [N8VEM-S100:4734] Re: An ARM CPU on the S100 bus
Previous by thread: Re: ZFDC Controller under control of the PC-BIOS??
Next by thread: RE: [N8VEM-S100:4744] Re: ZFDC Controller under control of the PC-BIOS??
Index(es):
- Date
- Thread