Re: Run of Dual CF-Card/Hard Disk IDE S-100 Boards

[David Fry <dgf...@googlemail.com>]

Hi Thomas,

 

K1 should be jumpered 2-3 (upper position)

 

regards

 

David Fry

On Sunday, June 8, 2014 12:35:48 AM UTC+1, Thomas Owen wrote:

Hello David,
The jumper is not on K1, so where should it be, top or bottom pins?  In looking at the schematic I can see the logic you are referring to so I will set up my logic analyzer and start probing around u16.

Thanks for the advice ,

Thomas