Re: A windows based program to write a CPM3 image to a CF card for the S100 IDE board

Well you will need a new ldd and sys file as the ones I think you are using have the off by 1 sector problem. You should be able to take the files I am putting together and make a new CF image if a few seconds. And customizing the files on the image is really easy - it is just a matter of using cpmcp as the copy utility to copy files from you PC into the CPM image file. I will have this all Documented hopefully by the end of the weekend - and David Fry will be my second pair of eyes to keep me honest :)

Dave

On Wednesday, June 18, 2014 2:58:42 PM UTC-5, Thomas Owen wrote:

Hi David,

well this is good news and I look forward to seeing what changes you made. Will I need to generate a new ldr and sys and simply place them on the CF?

Thanks,
Thomas

On Wednesday, June 18, 2014 2:29:25 PM UTC-4, David Fry wrote:
Hi Dave, John

just a quick update from me.

I have grabbed a few hours over the last couple of days to update the disk format to comply with cpmtools.

the changes are very minor, basically only the removal of one line of code (decrements LBA value by one) in each instance of the wrlba routine, this change

also removes the need for a modified MYIDEROM to serve as a boot platform, the CF disk can now boot directly from a S100 Z80 Monitor (option 'P').

I have started to update my documentation and remove obsolete information, hoping to have this completed by the end of the weekend when I wil upload a new ZIP file to my N8VEM folder and take down the old one.

The screenshot below shows the working CPM3 image, the files are as supplied in the CPM3 distro from http://www.cpm.z80.de/

The disk image was created using a combination of old and new methods, The Altair sim was used to create CPMLDR.COM and CPM3.SYS and these were placed into the disk image using the old method of sector copying. All the other files were copied into the disk image using cpmtools, the result being checked in a hex editor and all looks good.

one step closer to simplifying the process :-)

regards

David Fry
On Saturday, June 14, 2014 5:31:49 PM UTC+1, monahanz wrote:

Guys, it’s great to see all the progress and uptake this simple little IDE board has generated. Thomas in particular congratulations on putting so much time and effort into “hammering into shape” the process for first time installs. It helps tremendously but I think it will still be difficult for some people to do. We all should remember how it was when we first started!

I’m wondering if somebody out there could spend the time writing a PC/MSDOS based program to setup a CF card for first time users. If we agree the IDE board ports start at 30H, the only variable would be the console I/O. This could be either spliced into the final disk image with the above program (leaving room in the base code with NOP’s) or by answering a Q&A session and inserting code like the old XMODEM programs did. A CF card is laid down as Dave describes and is checked out. Once the image is laid down it can be dumped sector for sector any CF card (no holes of course). The image can even include a few CPM programs. Probably best to start with a non-banked CPM3 image. This program would run on a standard PC, format the CF card and write the image sector by sector. Not sure if Windows 7,8 allows you to do that easily but there must be a way.

This would allow anybody not as sophisticated as some of us, to get going right away and allow them to write more elaborate CPM3.SYS files that include a FDC, printer etc. in the BIOS for their own hardware.

I think something like this would be a tremendous asset for first time S100 users.

Any volunteers?

John