[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [N8VEM-S100:4101] ALTAIR/IMSAI 8080 CPU replacement board & FP-Mini Front panel
I have 10 TILs and 25 HP.
Please send one SMB and one HP mezzanine.
You can ship to my Paypal address.
Thanks.
Sent from my iPhone
On Jun 10, 2014, at 11:45 AM, Todd Goodman <t...@bonedaddy.net> wrote:
> Hi Don,
>
> I have SMB boards available. $20. You'll need a display mezzanine for
> it. There are three different ones depending upon your displays (TIL311
> - $6, LED Bar - $10, and HP5082 - $10)
>
> Shipping is $5.95 in the US.
>
> Thanks,
>
> Todd
>
> * Don Caprio <cap...@uxpro.com> [140610 14:42]:
>> I don't have a SMB board. Any available? If so I can look at options for
>> both.
>>
>>
>>
>> On Sat, Jun 7, 2014 at 12:25 PM, Tom Lafleur <laf...@lafleur.us> wrote:
>>
>>> When you make the panel for the front, look at an option for us who may
>>> want to install an SMB front panel board
>>>
>>> Thanks
>>>
>>>
>>> ~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~
>>> Sent from my Phone
>>>
>>>
>>> On Jun 7, 2014, at 3:07 PM, Fabio Battaglia <hkzl...@gmail.com> wrote:
>>>
>>> This is great!
>>> I'll definitely be interested in the chassis, multiple fpmini boards and
>>> if someone does a group buy of paddles, those too.
>>>
>>> Fabio
>>> On Jun 7, 2014 6:53 AM, "Don Caprio" <ilv...@gmail.com> wrote:
>>>
>>>> Josh, Rich, and S-100 gang,
>>>>
>>>> The Imsai front panel S-100 (aka fp-mini) was stalled for quite some
>>>> time. Family, work and
>>>> remodel project left no spare time.
>>>>
>>>> Looks like we have new life on the project. Many, many thanks to Josh who
>>>> got one of prototype
>>>> boards and worked out the final bugs. Looks like The next prototype
>>>> should be our last before
>>>> production run.
>>>>
>>>> This board is a bit pricey due to the cost of the mini paddle switches. A
>>>> completed set of paddle
>>>> switches goes for ~ $125.00. My source for the toggles left the company
>>>> so I'm finding a new
>>>> contact and pricing.
>>>>
>>>> The FP-Mini and Josh's new 8080 board is going to make a fantastic, two
>>>> board complete system.
>>>>
>>>> I'm working with a local sheet metal fabricator on a mini-chassis based
>>>> around the fp-mini and the
>>>> S-100 8 slot mother board. I needed a chassis design for the next board
>>>> layout. We'll need to move
>>>> switches around and provide mounting holes on the PCB. Anyone who has
>>>> ideas or experience
>>>> creating a photo mask for the Plexiglas section drop me a line. It may be
>>>> as simple as printing a
>>>> transparency on a laser printer.
>>>>
>>>> Once I get a final price on the chassis I'll send out a notice to see
>>>> who's
>>>> interested. The more we order the cheaper they are. I've mocked up a
>>>> prototype of the chassis
>>>> for your review and comments.
>>>>
>>>> Thanks.
>>>>
>>>> <mini-fp-chassis-small.jpg>
>>>>
>>>> <mini-fp-chassis-top-small.jpg>
>>>>
>>>>
>>>>
>>>> On 06/ 6/14 07:55 AM, Crusty OMO wrote:
>>>>
>>>> Thanks John,
>>>>
>>>> Andrew,
>>>>
>>>> That would be great if you could do a fill on the area around the
>>>> regulator, or perhaps walk me through it? The other error about pads being
>>>> next to each other doesn't matter, I just over rule the computer's
>>>> objection.
>>>>
>>>> Cheers,
>>>> Josh
>>>>
>>>>
>>>> ------------------------------
>>>> From: mon...@vitasoft.org
>>>> To: n8vem...@googlegroups.com
>>>> Subject: RE: [N8VEM-S100:3991] ALTAIR/IMSAI 8080 CPU replacement board
>>>> Date: Thu, 5 Jun 2014 21:26:15 -0700
>>>>
>>>> Josh, Andrew may be able to brush it up. He is a marvel at that these
>>>> things
>>>>
>>>> John
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *From:* n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com
>>>> <n8vem...@googlegroups.com>] *On Behalf Of *Crusty OMO
>>>> *Sent:* Thursday, June 5, 2014 8:29 PM
>>>> *To:* n8vem...@googlegroups.com
>>>> *Subject:* RE: [N8VEM-S100:3990] ALTAIR/IMSAI 8080 CPU replacement board
>>>>
>>>>
>>>>
>>>> Hi John,
>>>>
>>>> I uploaded the board, schematic(s), gerber files and firmware file to the
>>>> Wiki site.
>>>> Look in
>>>> Board Information, S-100 boards, S-100 ALTAIR-IMSAI 8080 CPU Board
>>>>
>>>> The DRC produces 2 errors which I don't know how to suppress.
>>>> 1 error is a drill pad next to a mounting pad for the SD card, I
>>>> oversized the pads and they overlap. Neither pad is an active pin or
>>>> conductor, the drill is just a pilot hole to position the SD card socket,
>>>> the pad is just to solder the body of the socket.
>>>> The other error(s) are from a bunch of traces I dumped around the voltage
>>>> regulator to act as some extra heat sink. I should really do a "fill" in
>>>> that area, but I don't know how and it's just easier for me to zig zag some
>>>> wide traces to do the job. I ignore the errors, the gerber files look good.
>>>>
>>>> The firmware file is just a modification of my 8080 monitor program.
>>>> It's been modified to use the 8250 UART's, and it also has the start of the
>>>> SPI/SD card interface. I only got as far as receiving the 0x01 status byte
>>>> from the SD card, which means it initialized successfully and I am able to
>>>> talk to it. In the weeks to come, I'll return to working on the firmware
>>>> to get it to boot CP/M from the SD card. But first, I must make some
>>>> progress with my ELF projects.
>>>>
>>>> Cheers,
>>>> Josh Bensadon
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> From: mon...@vitasoft.org
>>>> To: n8vem...@googlegroups.com
>>>> Subject: RE: [N8VEM-S100:3982] ALTAIR/IMSAI 8080 CPU replacement board
>>>> Date: Thu, 5 Jun 2014 09:20:20 -0700
>>>>
>>>> Josh, great work – you must have a lot of time on your hands!
>>>>
>>>> Could you put me down for 2 boards.
>>>>
>>>> Also could you point me to the most current schematic/board diagram
>>>>
>>>> Thanks
>>>>
>>>> John
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *From:* n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com
>>>> <n8vem...@googlegroups.com>] *On Behalf Of *Crusty OMO
>>>> *Sent:* Wednesday, June 4, 2014 7:20 PM
>>>> *To:* n8vem...@googlegroups.com
>>>> *Subject:* RE: [N8VEM-S100:3964] ALTAIR/IMSAI 8080 CPU replacement board
>>>>
>>>>
>>>>
>>>> Hi Guys,
>>>>
>>>> Well I'm finally done laying out this board. The autorouter only
>>>> produced swiss cheese with over 900 via's. It looked terrible!
>>>> Anyway, I scrapped everything the autorouter did initially, and proceeded
>>>> to layout the traces manually. Once I got what I thought was all the hard
>>>> parts done, I let the autorouter have another go at it. Again it did not
>>>> work out so well and it was unable to complete the board, so I proceeded to
>>>> undo it's changes and/or improve it's routing manually. I squeezed those
>>>> traces in there tight, any tighter and they'll be popping off the board.
>>>> Anyway, I'm working on the silkscreen layer and ready to do a run.
>>>> Here's a picture of the board layout....
>>>> You can see the serial port connections on the top left, SD card to the
>>>> right of the 27C256 EPROM, parallel ports next to that and the ALTAIR and
>>>> IMSAI front panel connectors. There are also a few jumpers around the
>>>> board to configure for CPU or Peripheral board only and ALTAIR/IMSAI mode.
>>>> Firmware for the board will be my next project, but I have to make
>>>> preparations for VCF-MW my priority. Dave Ruske and I will be doing a
>>>> COSMAC 1802 exhibit there in September.
>>>>
>>>>
>>>>
>>>> <mime-attachment.jpg>
>>>>
>>>>
>>>>
>>>> Cheers,
>>>> Josh Bensadon
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> From: crus...@hotmail.com
>>>> To: n8vem...@googlegroups.com
>>>> Subject: RE: [N8VEM-S100:3711] ALTAIR/IMSAI 8080 CPU replacement board
>>>> Date: Sun, 18 May 2014 00:57:20 +0000
>>>>
>>>> Hi Guys,
>>>>
>>>> Well, this project has just reached a milestone. The hardware is tested
>>>> and working. I had some rewiring to do to make it work for the ALTAIR, I
>>>> thought the ALTAIR and IMSAI front panels were (near) identical, but they
>>>> are not.
>>>> There are some jumpers on the board to configure between ALTAIR and IMSAI.
>>>>
>>>> Here's a picture of my debugging and testing setup. The board is being
>>>> tested in the ALTAIR.
>>>>
>>>>
>>>>
>>>> <mime-attachment.jpg>
>>>>
>>>>
>>>>
>>>>
>>>> Now entering Phase 2... building a PCB.
>>>>
>>>> Cheers,
>>>> Josh Bensadon
>>>> ------------------------------
>>>>
>>>> From: mon...@vitasoft.org
>>>> To: n8vem...@googlegroups.com
>>>> Subject: RE: [N8VEM-S100:3666] ALTAIR/IMSAI 8080 CPU replacement board
>>>> Date: Tue, 13 May 2014 13:56:05 -0700
>>>>
>>>> Very nice Josh!
>>>>
>>>> John
>>>>
>>>>
>>>>
>>>> *From:* n8vem...@googlegroups.com [mailto:n8vem...@googlegroups.com
>>>> <n8vem...@googlegroups.com>] *On Behalf Of *Crusty OMO
>>>> *Sent:* Tuesday, May 13, 2014 1:19 PM
>>>> *To:* n8vem...@googlegroups.com
>>>> *Subject:* RE: [N8VEM-S100:3664] ALTAIR/IMSAI 8080 CPU replacement board
>>>>
>>>>
>>>>
>>>> Hi Group,
>>>>
>>>> Well, I'm cooking up this board at the moment. I have all the hardware
>>>> figured out to run like the original CPU boards.
>>>> I need to do a little more testing of the hardware, then I'll proceed to
>>>> building the boards.
>>>> The Memory, I/O, UARTs and SPI interface to the SD card appear to all be
>>>> working.
>>>> 8K chunks of memory can become either ROM, RAM or mapped off the board.
>>>>
>>>> CPU: 8080A
>>>> UARTS: 2x 8250
>>>> RAM: 2x 32K
>>>> ROM: 32K
>>>> I/O: 8 input, 6 output pins
>>>> SPI to SD Card interface
>>>> ALTAIR & IMSAI Front Panel Connectors.
>>>>
>>>> Where ROM is selected in a block it overlaps the RAM on reads, but writes
>>>> go through to RAM.
>>>> The ROM can then be disabled and reads will come from the RAM at that
>>>> location.
>>>> The firmware is copying itself to RAM then switching off the ROM.
>>>> The CPU can be deselected with jumpers and the board will work as RAM/ROM
>>>> and I/O for another CPU on the bus.
>>>>
>>>> Pictures attached. Yellow-Data, Brown-Address, Blue-I/O,
>>>> Green-Control/Status & everything else.
>>>>
>>>> Regards,
>>>> Josh Bensadon
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>>
>>>> --
>>>> Don Caprio...@gmail.com
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups
>>>> "N8VEM-S100" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an
>>>> email to n8vem-s100+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "N8VEM-S100" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to n8vem-s100+...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups
>>> "N8VEM-S100" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to n8vem-s100+...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
>> --
>> -------------------------------
>> Don Caprio cap...@uxpro.com
>> http://www.uxpro.com
>> (925) 240-UNIX
>>
>> --
>> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.